Return to Search Results

Nissan Navara D22

Engine Remap

What's Included?

Pre-Tune Health Check
Engine Remap
Before & After Print Out

Model: YD25DDTi D22 2.5lt

Years: 2007 - 2012

Engine Remap: $1495.00


Share:
  • addressString

Stage 1

STANDARD
DYNO TUNED
DIFFERENCE

POWER

98

KW

122

KW

24

KW

TORQUE

304

NM

380

NM

76

NM

Nissan Navara D22 2.5L Diesel Engine Tune
Suits 2.5L YD25 turbo-diesel D22 Navara models, 2008 onwards.

The D22 Navara earned its place as a tough, no-nonsense workhorse, and it stayed on sale alongside the D40 for years thanks to its simplicity and value. From 2008 it gained a 2.5L common-rail turbo-diesel, and plenty are still getting around and working hard: on job sites, on farms, towing trailers and heading off-road on the weekend.

The 2.5L YD25 diesel is rated at 98kW and 304Nm from the factory. That’s a modest output, and a D22 with a loaded tray or a trailer behind it feels the weight on hills and at highway speed. The right tune gives the engine more to work with.

Engine tune

Our tune sharpens throttle response and lifts power and torque where the Navara needs them most: low and in the midrange, where it does its towing and heavy lifting. It pulls more strongly up hills and overtakes with less planning, and the whole vehicle feels less strained when it’s loaded up.

Our focus is controlled, real-world calibration that keeps the engine working within itself, rather than chasing headline figures. The result is a Navara that’s more responsive and easier to drive, whether you’re towing, working or driving every day.

Programmed through the OBD port

We reprogram the engine control unit through the OBD port. There are no chips, piggyback modules or cut wires, and nothing comes out of the vehicle.

What’s included

Pre-tune health check and baseline dyno run

We assess your engine under load, record its data and measure its current power and torque. If we find an issue, you’ll hear about it before we touch the tune, not after.

Fault code scan

We scan for stored and pending fault codes before any tuning starts.

Engine remap

Our calibration, developed for the YD25, delivers more power and torque with smooth drivability.

Data logging and dyno testing

We monitor how your engine responds under load throughout the tuning process and verify the results on the dyno.

Post-tune road test

Every vehicle is road-tested before handover so we can check how it drives beyond the dyno.

Before and after dyno printout

You’ll receive a printout showing your power and torque before and after tuning, so you can see the results for yourself.

Talk to the team

If you want more from your Navara, give the team a call to hear what our tune can do for it.

Please note

  • Before and after figures are engine figures. They are calculated by applying the percentage gain achieved on our dyno to the manufacturer’s quoted power and torque, and are based on vehicles running standard wheels and tyres. They are provided as a guide only.
  • Results vary between vehicles depending on kilometres, engine condition, modifications fitted, and wheel and tyre size. The before and after dyno print-outs supplied with each tune show figures measured at the wheels, which will be lower than engine figures. Larger or heavier wheels and tyres will reduce measured figures further.
  • Vehicles must be in good mechanical condition prior to tuning. Increases in power on high-kilometre engines are assessed case by case.
  • Additional parts and labour may be required where worn or faulty components are identified, and these will be quoted before any work proceeds.
  • Prices are subject to change without notice. Images are for illustration purposes only.


You May Also Be Interested In