Return to Search Results

Nissan Navara D40 STX550

Engine Remap

What's Included?

Pre-Tune Health Check
Engine Remap
Before & After Print Out

Model: V6 3.0lt

Years: 2011 - 2014

Engine Remap: $1495.00


Share:
  • addressString

Stage 1

STANDARD
DYNO TUNED
DIFFERENCE

POWER

170

KW

212

KW

42

KW

TORQUE

550

NM

687

NM

137

NM

Nissan Navara D40 ST-X 550 3.0L V6 Diesel Engine Tune
Suits 3.0L V6 turbo-diesel D40 Navara models, including the ST-X 550.

The Navara ST-X 550 arrived in late 2010 as the flagship of the D40 range. It combined a Renault-Nissan 3.0L V6 turbo-diesel with a seven-speed automatic, and it was one of the strongest dual-cab utes on the market. Plenty are still out there towing vans, boats and trailers and heading well off the beaten track.

The 3.0L V6 diesel is rated at 170kW and 550Nm from the factory. That’s a strong engine as it stands, but a Navara with a heavy van or a loaded tray still feels the weight on long climbs and at highway speed. The right tune gives the V6 more to work with.

Engine tune

Our tune sharpens throttle response and lifts power and torque where the Navara needs them most: low and in the midrange, where it does its towing and heavy lifting. It pulls more strongly up hills and overtakes with less planning, and the whole vehicle feels less strained when it’s loaded up.

Our focus is controlled, real-world calibration that keeps the engine working within itself, rather than chasing headline figures. The result is a Navara that’s more responsive and easier to drive, whether you’re towing, touring or driving every day.

Programmed through the OBD port

We reprogram the engine control unit through the OBD port. There are no chips, piggyback modules or cut wires, and nothing comes out of the vehicle.

What’s included

Pre-tune health check and baseline dyno run

We assess your engine under load, record its data and measure its current power and torque. If we find an issue, you’ll hear about it before we touch the tune, not after.

Fault code scan

We scan for stored and pending fault codes before any tuning starts.

Engine remap

Our calibration, developed for the 3.0L V6 diesel, delivers more power and torque with smooth drivability.

Data logging and dyno testing

We monitor how your engine responds under load throughout the tuning process and verify the results on the dyno.

Post-tune road test

Every vehicle is road-tested before handover so we can check how it drives beyond the dyno.

Before and after dyno printout

You’ll receive a printout showing your power and torque before and after tuning, so you can see the results for yourself.

Talk to the team

If you want more from your Navara, give the team a call to hear what our tune can do for it.

Please note

  • Before and after figures are engine figures. They are calculated by applying the percentage gain achieved on our dyno to the manufacturer’s quoted power and torque, and are based on vehicles running standard wheels and tyres. They are provided as a guide only.
  • Results vary between vehicles depending on kilometres, engine condition, modifications fitted, and wheel and tyre size. The before and after dyno print-outs supplied with each tune show figures measured at the wheels, which will be lower than engine figures. Larger or heavier wheels and tyres will reduce measured figures further.
  • Vehicles must be in good mechanical condition prior to tuning. Increases in power on high-kilometre engines are assessed case by case.
  • Additional parts and labour may be required where worn or faulty components are identified, and these will be quoted before any work proceeds.
  • Prices are subject to change without notice. Images are for illustration purposes only.


You May Also Be Interested In